| 282 | 9 | 89 |
| 下载次数 | 被引频次 | 阅读次数 |
在基于公共信息模型(CIM)的配电网拓扑建模规范的基础上,研究了配电网设备的GIS数据建模方法以及空间连接逻辑关系;提出了基于GIS的专题图布局算法(单线图和系统图布局生成技术);并通过佛山市电力GIS建设对拓扑模型和专题图布局算法进行了应用和验证。结果表明,算法能满足专题图布局科学、布线美观和避免交叉等技术要求。
Abstract:On the basis of the distribution network topology modeling principles provided by CIM, we discussed the GIS data modeling of distribution network equipment and their spatial logical connections at rst. And then, we provided a layout algorithm for the thematic map, including the generation technologies of the single line and system diagrams. Finally, we practiced and verified the topology data model and thematic map layout algorithm by implementing the Foshan power geographical information system. e results show that the algorithm can meet the key technical requirements, such as scientificfiayout of thematic map, clear wiring and avoiding crossover.
[1]陈根军,顾全.基于CIM的配电网一体化追踪拓扑[J].电力系统自动化, 2009,33(3):59-63
[2]李盟,秦立军,郭庆,等.基于CIM模型的电网拓扑分析[J].电力科学与工程, 2011,27(9):18-22
[3]吴丽贤,邓肃.基于GIS的配网单线图自动成图算法[J].信息技术, 2016(8):155-158
[4]胡森,徐学军,冯晓良.基于配电GIS动态拓扑关系生成电气接线图[J].继电器, 2007,35(9):52-55
[5]苏克明,邓其军,彭丹军.基于供电环的配电网拓扑建模研究[J].江西电力, 2012,36(3):27-32
[6] Byunghun L, Dae-Kyoo K. Harmonizing IEC 61850 and CIM for Connectivity of Substation Automation[J]. Computer Standards and Interfaces, 2017(50):199-208
[7]罗庆,吴良良,寿挺,等.基于CIM的电网规划管理决策辅助系统[J].电力系统保护与控制, 2016,44(4):111-117
[8]吕欣,张铁峰,吕越颖,等.基于CIM的配网理论线损在线计算系统[J].电力科学与工程, 2014,30(8):74-78
[9]杨成顺,黄淮,戴宇辰,等.基于CIM的配电网三维可视化关键技术研究与实现[J].电力科学与工程, 2017,33(5):6-10
[10]方正云,陈辞.配电网单线图自动化生成及综合应用[J].机电信息, 2012(6):39-41
基本信息:
中图分类号:TM727;P208
引用信息:
[1]吴丽贤,林钰杰.基于CIM+GIS的配电网拓扑建模与布局算法研究[J].地理空间信息,2019,17(09):76-79+10.
基金信息:
广东电网有限责任公司科技资助项目(030600kk52160031)
2019-09-19
2019-09-19
2019-09-19